Value
Description
0x00
Idle
0x01
Defective Motor - One of the motors has failed to perform its expected
assignment.
0x02
Sensor Problem - One of the sensors has failed to provide its response.
0x03
Validator Busy - The validator is busy and can not answer a detailed command
right now.
0x04
ROM Checksum Error - The validators internal checksum does not match the
calculated checksum.
0x05
Validator Jammed - A bill(s) has jammed in the acceptance path.
0x06
Validator was reset - The validator has been reset since the last POLL.
0x07
Bill Removed - A bill in the escrow position has been removed by an unknown
means. A BILL RETURNED message should also be sent.
0x08
Cash Box out of position - The validator has detected the cash box to be open
or removed.
0x09
Validator Disabled - The validator has been disabled, by the VMC or because of
internal conditions
0x0A
Invalid Escrow request - An ESCROW command was requested for a bill not in
the escrow position.
0x0B
Bill Rejected - A bill was detected, but rejected because it could not be
identified.
0x0C
Possible Credited Bill Removal – There has been an attempt to remove a
credited (stacked) bill.
0xFF
Not known or not initialized status
Table 2: Bill validators status codes
© 2016 – AUTOMATROM SRL – www.vendingtools.ro
