Servos
•
Locate the chassis
o
Position a servo motor on the slot as shown. Notice how the servo wires are
oriented. Make sure servo motor tab is outside the chassis.
o
Secure the servo using four M3 x 10 screws and nuts. To make assembly easy,
start with the lower screw and then go to the upper screw. Do not tighten the
screws until all the screws are in place and the servo is secured properly. Once all
the screws are in, tighten it. If the nuts spin, you may need to use a plier to hold
the nut as you tighten the screw.
o
Secure the second servo exactly as the first servo. Do not flip the servo. Make
sure the wires are oriented in the same direction as the first servo.
