1.
2.
3.
4.
5.
6.
7.
a.
i.
ii.
b.
i.
ii.
8.
9.
10.
11.
12.
13.
14.
a.
b.
15.
1.
2.
3.
4.
5.
Router Functionality Use Case - Internet connectivity for Wired and Wireless Client(s)
Ethernet Port of RPI should be connected to WAN Network
Connect WiFi Dongle to RPI ( Please refer to supported dongle here
RDKB RPI Setup Information#DonglesInformationLinks
Client PC(s) should be connected to RPI through Usb2Ethernet Adaptor which should be supported by RPI ( Please refer to
for supported usb to ethernet adapter by RPI ). Ethernet switch is an optional in between usb2ethernet adapter and
Client PC
Once powered on, RPI should be able to list interfaces erouter0,brlan0 and wlan0 after boot up
Logs can be verified under /rdklogs/logs folder
Now, client pc should be able to get private ip in the rage 10.0.0.x range
Two radios are supported by RPI (2.4 and 5 GHz) respectively. By default following SSID's are broadcasted by RPI under respective radio
2.4GHz (Private WiFi)
SSID name - "RPI3_RDKB-AP0"
Password - "rdk@1234"
5 GHz (Xfinity WiFi)
SSID name - "RPI3_RDKB-AP1"
Password - "rdk@1234"
Connect mobile with above default SSID name and password for respective radio. Any one radio should be used for establishing connection in
mobile
Now, mobile should be able to get private ip in the rage 10.0.0.x range
To get Internet for both mobile and wired client pc , user should configure captive portal by accessing any url or 10.0.0.1 from mobile browser or
PC browser. When RPI image is flashed for the first time captive portal will be enabled which will auto redirect to captive portal page and asks
user to re-configure the default SSID name and password of radio(s) . Please refer to
Captive Portal in R-Pi User Manual
Client PC should be able to connect to internet now. Ping test can also be done by connecting gateway ip 10.0.0.1
Since reconfiguration is done for default SSID username and password in webUI, provide the reconfigured SSID and password in mobile for
reconnection with RPI
Now, mobile and wired client pc should be able to browse the internet. Please refer to
Clients Connection and its set up Diagram in RPI - User
for more information regarding the same for both wired and wireless connection information
Connected client(s) PC and mobile information can be verified through webui by executing URL 10.0.0.1 in Client PC Browser and login with
following credentials
Username : admin
Password : password
for various features that can be controlled through webui
Lists of Supported Features
DHCP Gateway Configuration
Connected Devices (Wired/Wireless)
Private Wifi 2g/5g
Xfinity-wifi 2g/5g
