8
EN
8. USE WARNINGS
We recommend following the indications below in order to always work in safety conditions.
All the operations must be carried out complying strictly with the safety rules of the
country where the machine is to be installed.
It is STRICTLY FORBIDDEN to smoke during the installation or adjustment operations of
the pneumatic scissors.
The Customer undertakes to comply with and make his staff observe all the rules and
regulations in force concerning safety, prevention of accidents and health in the work
place. Therefore, the Customer assumes the responsibility to strictly follow all the rules and
regulations in force, as well as the special provisions in force in sport and public installations
the Customer declares to know after receiving all the relative necessary information.
The pneumatic scissors work also without their safety protective device and
when the protection guard is lifted. This protective device must NEVER be
removed.
Always check the resistance of the material to be cut and the kind of blade which is being
used.
The Customer shall equip his own personnel with all the individual safety protections for
the execution of the works, as well as with the ones which might be prescribed by the
Manufacturer due to specific danger conditions of the plant or of the area where the
personnel must work.
Only one operator must use the pneumatic scissors always standing behind the guide
handle. Do not make any adjustment while the blade is working.
Always pay attention to the position of the air pipe to prevent it from being cut or
damaged by the blade.
It
is
allowed
to
assemble
pneumatic
scissors
FP862MT
on
machines
O.E.M.
on
condition
that
their
original
structure
is
not
modified.
Otherwise,
the
intervention
must
be
certified
by
Rasor
®
.
The
pneumatic
scissors
FP862MT
are
equipped
with
double
safety
push
button
with a
lever
and
a
ratchet
on
the
handle:
the
ratchet
prevents
the
start
push
button
from
being
enabled
accidentally,
the
lever
operates
the
scissors.
Never
remove
the
ratchet.
