RASOR FP861RC, Use Manual

Page: 6 / 16

EN
22
4. PRODUCT DESCRIPTION
2
1
3
13
5
9
7
8
10
6
11
12
4
14
The fixture described in this manual is a pneumatic scissor model FP861RC which is used in
order to quickly cut paper, fabric and plastic rolls.. It is extremely versatile, light and precise in
the cutting operation, suitable also for very difficult cuttings.
On the front part the scissor is provided with a three-position selector that allows adjusting
quickly and faultless the desired cut height. Thanks to this selector it is possible to make the
blade protrude from the supporting foot at three different heights according to the cut
requirements. One special feature of pneumatic scissors FP861RC is their ability to sharpen
the blade in each moment without disassembling it by means of a grinding wheel mounted
on the scissors head. After carrying out this operation, it is possible to perform immediately
the cutting operation. The pneumatic scissors are provided with a threaded connection to
the pneumatic circuits. The turbine, perfectly balanced, with a high number of revolutions
and totally free of maintenance, reduces the vibrations and the noise to the minimum.
The use of compressed air as source of energy allows working continuously without problems
of heating or motor overload. The mechanical parts are made up of steel and high resistant
bronze and require a lubrication after many working hours.
16
15
1
1/4" gas connection for the air
connector
9 Sharpening button
2
Safet device to enable the
control lever
10
Protection guard of the blade
(movable)
3 Control lever 11 Handle
4 Supporting foot 12 Motor support
5 Polygonal blade 13 Silencer
6 Greaser 14 Cutting height selector
7 Pneumatic motor 15 Selector adjusting knob
8 Sharpener 16 Bush with return spring
Device components
5. TECHNICAL FEATURES
The technical data are only indicative and they can be changed without notice.
8 side blade Ø 86 mm, in H.S.S. steel
5 side blade Ø 86 mm, in H.S.S. steel
8 side blade Ø 86 mm, in H.S.S. steel treated
with titanium
8 side blade Ø 86 mm, in H.S.S. steel
covered with Teflon
5 side blade Ø 86 mm, in H.S.S. steel
covered with Teflon
8 side blade Ø 86 mm, in hard integral
metal (Widia)
Features of the available blades
86THSS
86THSSTN
86TMD
86PHSSTN
86THSSTF
86PHSS
6. RUMOR LEVEL
NOTE
It is advisable for pneumatic scissors owners to verify the compliance with the standard
concerning safety of workers: Italian legislative decree 81/08.
The use of ear protecting devices is compulsory.
The maximum acoustic pressure level emitted by pneumatic scissors FP861RC is about 60 dB
(A). Noise tests have been carried out in compliance with Standard UNI EN ISO 11202:2010.
The device noise levels, measured at different distances (without any sound wave filtering
system), vary in the extent of few db (A). The noise level has been detected with the
silencer supplied mounted on the discharge unit.
7. FIELD OF APPLICATIONS
Pneumatic scissors FP861RC have been designed, manufactured and assembled to cut every
kind of paper or similar materials, fabric and plastic.
This equipment must not work:
- in areas prone to explosions;
- in presence of fine dust or corrosive gases;
- to cut metal and wooden materials.
It is forbidden to use pneumatic scissors FP861RC for purposes different from the
above-mentioned ones.
86 mm
900 revolutions/min
about 20 mm
400 W with maximum pressure
max. 6 bar
1600 g
3100 g
9 liters/sec.
LUX 200
< 2,5 m/s
2
0 ~ 55°C
10 ~ 95% without condensate
Temperature
Humidity
Weight with package
Air consumption
Minimum luminosity for working
operations
Vibrations at the start up
Cutting working height
Power
Weight
Pneumatic scissors FP861RC features
Blade diameter
Blade speed
Working pressure