EN
7
5. TECHNICAL FEATURES
This technical data is only indicative and may be subject to change without notice.
100 mm, with counterblade - hard metal
900 rev/min
? 35 mm
400 W with max. pressure
6 bar (max)
1350 g
3050 g
9 litres/sec
LUX 200
< 2,5 m/s²
0 ~55 º
10 ~ 95% without condensate
Temperature
Humidity
Weight with package
Air consumption
Minimum light for working operation
Vibrations at the start up
Cutting working depht
Power
Weight
Cutting unit FP100L features
Blade diameter
Blade speed
Working pressure
6 side blade Ø 100 mm, H.S.S. steel
Circular blade Ø 100 mm, Extra steel
4 side blade Ø 100 mm, Germany Extra
steel
6 side blade Ø 100 mm, H.S.S. steel
covered with Teflon
6 side blade Ø 100 mm, solid carbide
Features of the available blades
10EHSS
10SEXTG
10EMD
10EHSSTF
10CSW
6. NOISE LEVEL
The maximum acoustic pressure level emitted by cutting unit FP100L is about 72 dB (A).
Noise tests have been carried out in compliance with Standard ISO 15744:2008. The device
noise levels, measured at different distances (without any sound wave filtering system), vary
in the extent of few db (A). The noise level has beeen detected with the silencer supplied
with the fixture assembled on the exhaust. The silencer must never be removed.
NOTE
It is advisable for cutting unit FP100L owners to verify the compliance with the standard
concerning safety of workers: Italian legislative decree 81/08.
Cutting unit FP100L has been designed, manufactured and assembled to cut any kind of
fabrics or materials, with the exception of metal, plastic or wood, by means of rotary blades.
This equipment must not work:
- in areas prone to explosions;
- in presence of fine dust or corrosive gases;
- to cut plastic, metal and wooden materials.
It is forbidden to use cutting unit FP100L for purposes different from the above-
mentioned ones.
7. FIELD OF APPLICATION