EN
9
10. RESIDUAL RISKS
11. USE
5
4
6
7
A
Even though the bench cutter is safe, operators must pay attention to preserve their and
other people’s safety.
L
At the end of the working operations, the motor could be very hot.
L
The cutting blade can work even when the protective device is disassembled.
To use the bench cutter manually, proceed as follows:
1) Lay the material to be cut on a table;
2) Connect the cutter to the electric feeding (see picture 4);
3) Put the material on the cutting foot;
4) Adjust the front mobile protection according to the thickness of the material to be cut;
5) Enable the switch; once it has been enabled, it lights with a green light (see picture 5);
6) Press the starting lever after having moved the safety catch (see picture 6);
7) Push the bench cutter to the desired direction, by trying to put the material in front
of itself as stretched as possible, preventing it from curling in the front part of the
cutter. To work, the cutter must be placed on a surface and must slide by means of
the rolls placed under the sliding platform.
NOTE:
The thrust on the bench cutter must be as uniform as possible. To carry out linear cuts with
precision (and to follow predetermined paths), we also recommend using the arrow point
(see point “A” in picture 7).
