– 13 –
RTP-B33TC
/ RTP-W33S
/ RTP-B43TC
/ RTP-W43S
電
熱
水
瓶
Thermo
Pot
4. Operation Instructions
1. Before First Use
• When the unit is new, it may have smell due to the new packing. The smell will gradually
disappear with time.
• Before first use, it is recommended to clean the inner pot by boiling water. After boiled,
press the ‘Pour’ key to dispense half of the hot water to clean the water dispense system
and then empty the inner pot.
2. Fill water
• Open the upper lid and fill water into the thermo pot.
• Beware the water level must not exceed the full water level.
• After filling water, close the upper lid securely until a snap sound is heard.
3. Boil
➔
Keep Warm
• Plug one end of the power cord into the power connector of the thermo pot and the
other end into the power socket. The thermo pot will automatically enter the boiling
progress. The boiling indicator will be on. Once water has been boiled, the thermo pot
will switch to keep-warm mode automatically, the keep-warm indicator will be on. Keep
connecting to the power if you need to keep warm or use the electric pump or cup push
function.
• Attention: Water dispense may be not smooth when water is boiling or right after boiled.
4. Reboil
➔
Keep Warm
• Please make sure water must be above the refill level before reboiling, otherwise water
should be refilled.
• Press the “Reboil” key, the boiling indicator will be on. After reboiled, the thermo pot
will switch to keep-warm mode automatically. The keep warm indicator will be on.
• Attention: Water dispense may be not smooth when water is boiling or right after boiled.
5. Cooling Function
• Cooling status means the boiling and keep warm function are deactivated, water will
gradually cool down to room temperature. Connect the thermo pot with power when
using cooling function, so the electric pump and cup push function can be used.
• After water has been boiled, the keep warm indicator will be on. Press the “Boiling/
Cooling” key, the boiling/cooling indicator will be on. The thermo pot will switch to the
cooling status.
• In order to switch from the cooling status to the boiling or keep warm status, press the
“Boiling/Cooling” key to start the boiling process. The boiling indicator will be on. After
water boiled, the thermo pot will switch to keep warm mode automatically and the keep
warm indicator will be on.
Shun Hing (37565(M)).indb 13
12年8月29日 下午3:53
Summary of Contents for RTP-B33TC
Page 18: ......
