Rasonic RSM-H3505, Operation Manual

Page: 24 / 26

22
6. Trouble Shooting and Treatment
During operations, if any error occurred, please check the following table
before calling for service. Below are common errors and the checks to
perform.
Error Code /
Symptoms
Check Points Remedy
High Temperature Is the appliance
overheat? Wait for the mixing
cup until it is cool
down.
Food cannot be
chopped plenty No or too little water
in the cup? Add water between
the upper and lower
water level marks.
Too much or too little
ingredients? Add ingredients
according to the
recommended
amount.
The blade does
not spin
Too much, too
large or too hard
ingredients? Unplug the power
and then check
whether the
ingredients too much,
too large or to hard.
Is it properly
assembled? Unplug the power
and check if the
appliance is properly
assembled.
Pasted bottom Is the jug not
completely cleaned? Clean the jug
throughly.
If the above remedies/solutions cannot fix the problem, unplug the
appliance immediately, note the error code and report it to Shun Hing
Electric Service Centre Ltd. (Tel: 2406 5666) for checking and repairing.
To avoid any danger and damage to the appliance, do not disassemble or
repair it by yourself.