Rasonic RPD-YS27AU, Instruction Manual

Page: 28 / 35

27
When water tank is full(5L), the water tank full indicator will light up and flash, the unit will stop
operation.
Please empty water tank for operation resume.
Don't immediately remove water tank when full water LED light up, until few minutes
later and no water attached on the cooling system.
Press power off and empty water before moving the unit to avoid water spillage on floor or
penetrate to inner part.
The dehumidified water on the evaporator is likely to frost at low temperature, which may cause
the dehumidification water to not drip inside the water tank, it is not a malfunction.
Water drain hole at middle plate must be cleaned to avoid water blockage.
Please do not take out or throw away the polyfoam floater in this water tank, otherwise it will
cause auto-stop function failure.