5
th
rack
4
th
rack
3
rd
rack
2
nd
rack
1
st
rack
Rotisserie
skewer insertion hole lid
skewer grid on third rack
skewer insertion hole
skewer tip
skewer
skewer handle
tray on first rack
Use of rotisserie accessories
Pass the skewer through the chicken and lock the
clamps, insert the tip of the skewer into the hole found
at the rear panel of cavity and make sure that it
completely leans on the frame and fits in motor shaft. To
do this, first you have to turn the lid to the side, which is
found in front of the skewer insertion hole, as shown in
the figure. After that, fit the skewer fit the skewer onto
the skewer grid which you will place on the third rack.
Remove the handle from skewer, if it is installed and
close the oven door. The handle must be atteched only
for removing the food after grilling.
Make sure that the oven is not operating while performing these operations.
24
