background image

 

 

 

 
 

Regulatory and Integration Information

 

 

Regulatory Compliance Identification Numbers

 

For the purpose of regulatory compliance certifications and identification, this system is 
assigned a serial number. This system serial number can be found on the product label, 
along with the required approval markings and information. When requesting certification 
information for this product, always refer to this serial number. This serial number should 
not be confused with the marketing name or model number. 

 

Product Regulatory Compliance

 

Product Safety Compliance

 

This power supply complies with the following safety requirements: 

 

 

IEC 60950-1 

Safety of Information Technology Equipment 

EN 60950-1 

Safety of Information Technology Equipment Including Electrical Business 
Equipment,  European  Committee  for  Electro-technical  Standardization 

(CENELEC) 

UL 60950-1 

Safety of Information Technology Equipment 

 

Worldwide Safety approvals can be supplied upon request. Please contact your sales 
representative for approvals. 

 

Product EMC Compliance

 

This product is assembled from components that have been tested and verified to comply 
with the following electromagnetic compatibility (EMC) regulations. 

 

Summary of Contents for ApplianceStor 61
































Reviews: