Rasha Professional A/S 1130 Palmyrita Ave. Ste 320, Riverside CA, 92507
|
951-654-3585
rashaprofessional .com
|
13
DIMMER MODES
For DMX control, there are four possible settings for controlling
the rate of dimming.
DI 1 - LINEAR - The increase in light intensity appears to be
linear as DMX value is increased
DI 2 - SQUARE LAW - light intensity control is finer at low levels
and coarser at high levels.
DI 4 - INVERSE SQUARE LAW - light intensity control is coarser
at low levels and finer at high levels.
DI 4 - S-CURVE - light intensity control is finer at low levels and
high levels and coarser at medium levels.
To set the fixture’s dimmer curve:
1. Select DINN and press the ENTER button to confirm. The present mode will blink on
the display.
2. Use the DOWN and UP buttons to select: DI I or DI 2 or DI 3 or DI 4
3. Once the mode has been selected, press the ENTER button to set it.
SOUND ACTIVATION
The fixture has a built-in microphone that can be used to
synchronize its behavior to the beat of music. When the fixture
is not connected to a DMX controller, and is running in Show
Mode, it can be set to trigger scene changesm (effects and color
changes) in synch with music.To turn on/off sound activation mode:
1. Select Soun and press the ENTER button.
2. Use the DOWN and UP buttons to select any type of sound effect(Sd1-Sd5) .
3. Once the mode has been selected, press the ENTER button to set it
MENU
UP
DOWN
ENTER
8
.8
.8
.8
DINN
O
utput
O
utput
O
utput
O
utput
DMX %
DMX %
DMX %
DMX %
Optically Linear
Square Law
Inverse Square Law
S Curb
MENU
UP
DOWN
ENTER
8
.8
.8
.8
SOUN
