6
Rasha Professional A/S | 1800 Rustin Ave, Riverside, CA, 92507 | 951-654-3585
Rashaprofessional.com | [email protected]
Disconnect the product from the power outlet before replacing the fuse.
Power Linking
Before mounting the product, read and follow the safety recommendations indicated in the
Safety Notes.
The Fiesta String (and BALL’s) may be installed using various ways to achieve stunning looks,
but the bulbs
MUST
hang at a 90° perpendicular angle to the ground. This will prevent rain
or moisture from collecting in the lamp holders.
Rigging
▪
Before deciding on a location for the product, always make sure there is adequate
length/distance to the controller and other strings. Use the ball tension string if
necessary.
▪
Make sure that the structure onto which you are mounting the product can support
the product’s weight. See the Technical Specifications for weight information.
▪
Use the built-in eyelets to hang the Fiesta String and BALLs. The ball tension string may
be hung with zip-ties or equivalent.
Installed fuse
(held by plastic clip)
The product provides power linking via the outlet located in the back of the product.
Please see the diagram below for further explanation.
Power Linking Diagram
Mounting
Controller
The Cosmos (Controller) is IP20 rated. Keep it away from water, solvents and
chemicals. Take care to site it away from potential water hazards, for
example, avoid installing it where excessive humidity, water splatter or
condensation may occur
Orientation
