Tiller Folding and Tiller
Transport Lock
The tiller can be folded down for transport and
storage. Take care when lowering the tiller not to
pinch your fingers at the base of the tiller. Once in
the folded position, the tiller can be locked in place
to avoid tiller movement during transport and/or
storage using the “transport lock” - see the
“Transport Lock” section of this manual for further
details.
Tiller Folding:
• Rotate the knurled knob
anti-clockwise
sufficiently for the retaining serrations to allow the
tiller to move (Fig.13 & 15).
• Lower the tiller
so that it is in its lowest position.
• Rotate the knurled knob
clockwise and ensure
that it is tight and the retaining serrations are fully
engaged.
Tip:
The tiller can be adjusted to achieve a
comfortable driving position.
Tiller Transport Lock:
To lock the tiller (steering) during transport and
loading/unloading from a vehicle:
• Pull and then twist the lock-wheel
(Fig.14) in a
clockwise direction.
• Release the wheel.
The steering is locked.
• To unlock the steering/tiller
, reverse the above
procedure.
Transferring In And Out Of
The Scooter
If you feel at all uncertain about getting in or out of
the scooter seek assistance.
Transferring into the Scooter from the Front
Before getting in:
• Make sure that the scooter is on a level
surface,
and that it is not in Freewheel mode.
• Make sure the brakes are engaged
- try to push
the scooter a little to verify that the brakes are working.
• Ensure that the ignition key is turned off.
(The LED / lamp on the dashboard will not be on or
flashing)
• Ensure that the handlebar / tiller adjustment
is fully tightened
and that any accessories are
properly fitted and secured. (Fig.13)
• Ensure that the transport tiller lock is not
engaged
by checking that the steering is free to
operate. (Fig.14)
• The seat should be facing forwards
with the
seat back in the upright position.
• Adjust the handlebars / tiller
so that the front
wheels are facing forward.
11
13
14
15
Warning!
Before driving, always check that
the tiller is securely in the upright position and
that the tiller transport lock is disengaged. Safe
steering will be impossible if you do not !