Rascal R6 300 Scooter Owner’s Manual
EMC Part: 19277200 • Rev. 06 • 09/04/2007
7
Fuel Gauge
Indicates the charge level of your batteries. If the
needle goes into the red area, the batteries need to
be charged as soon as possible. If the needle is all
the way to the right side of the green area, the
batteries are fully charged. As the needle moves to
the red area it indicates the level of charge
remaining in the batteries.
Status Lamp
A green LED lamp indicates that power is available
and serves as a troubleshooting indicator when
faults or errors are detected (see “Controller
Troubleshooting” on page 27).
Clock
For convenience, the dash includes an analog clock
displaying the current time of day. The clock may be
set or adjusted by removing the casing from the
dash and using the stem to change time settings.
The clock is powered by a separate battery and
does not require the vehicle to be turned on to
operate.
Speed Control
The Dial-A-Speed knob regulates the maximum
speed of the scooter. Start at the slowest speed
(settings: 0, 1) until you feel confident with
controlling your scooter. Turning the speed dial
counter-clockwise (towards “1”) decreases speed.
Turning it clockwise (towards “10”) increases speed.
Use slower speeds when first driving your scooter to
avoid accidents.
Engager Lever
The operating speed of your vehicle is proportional
to the amount you squeeze the engager lever.
Smooth starts and stops can be accomplished by
gradually moving the engager lever (similar to a gas
pedal in an automobile). Squeeze the engager lever
on the right side to move forward. Or squeeze the
engager lever on the left side to move in reverse.
FUEL GAUGE
18
26
20 22 24
+
-
STATUS LAMP
12
3
9
6
1
2
3
4
5
6
7
8
9
1
0
FORWARD
REVERSE