Raritan PX3-3000 series, User Manual

Page: 118 / 875

Chapter 5: Introduction to PDU Components
94
Operating the Dot-Matrix LCD Display
Enter manual mode when you want to operate the dot-matrix LCD
display. You can use the dot-matrix LCD display to:

Show information of the PX3 device, built-in components, or
connected peripheral devices

Control outlets if your model supports outlet-switching

Control actuators if any
Color changes of the display's top and bottom bars:

In the manual mode, both the top and bottom bars will turn yellow or
red to indicate the presence of any alert. For color definitions, see
Yellow- or Red-Highlighted Sensors (on page 206).
Screen with yellow bars Screen with red bars
All alerts enter the warning level only. Partial or all alerts enter the critical
level.

Both bars turn black when there are NO alerts.
Screen with black bars