Chapter 8: Using the Command Line Interface
429
Option
Description
false
The wireless network connection is NOT
successfully established when the PX3 finds that
the TLS certificate is not valid due to incorrect
system time.
EAP CA Certificate Example
This section provides a CA certificate example only. Your CA certificate
contents should be different from the contents displayed in this example.
To provide a CA certificate:
1.
Make sure you have entered the configuration mode. See
Entering
Configuration Mode
(on page 403).
2.
Type the following command and press Enter.
config:#
network wireless eapCACertificate
3.
The system prompts you to enter the contents of the CA certificate.
4.
Open a CA certificate using a text editor. You should see certificate
contents similar to the following.
5.
Select and copy the contents as illustrated below, excluding the
starting line containing "BEGIN CERTIFICATE" and the ending line
containing "END CERTIFICATE."
Summary of Contents for PX3-1000 series
