RRaarriittaann C
Coom
mppuutteerr,, IInncc..
400 Cottontail Lane
Somerset, NJ 08873
U.S.A.
Tel. 1-732-764-8886
Fax 1-732-764-8887
E-mail: [email protected]
http://www.raritan.com
RRaarriittaann C
Coom
mppuutteerr EEuurrooppee,, BB..VV..
Mient 16c,
2903 LC Capelle A/D IJssel
The Netherlands
Tel. 31-10-284-4040
Fax 31-10-284-4049
E-mail: [email protected]
http://www.raritan.com
RRaarriittaann C
Coom
mppuutteerr TTaaiiw
waann,, IInncc..
5F,121,Lane 235,Pao-Chiao Rd,
Hsin-Tien City,Taipei Hsien
Taiwan,ROC
Tel. 886-2-8919-1333
Fax 886-2-8919-1338
E-mail:[email protected]
http://www.raritan.com
RRaarriittaann C
Coom
mppuutteerr JJaappaann,, IInncc..
Kuga Building 7F, 11-6
Kuramae 4-chome Taitoo-Ku
Tokyo 111-0051, Japan
Tel. 81-3-5833-6360
Fax 81-3-5833-6336
Email: [email protected]
http://www.raritan.com
P
C
SS
h
a
re
Sequence of Steps for PC-Share Installation
A. C
Connect tthe M
Main U
Unit aand U
User 11
1. Using the included CCP06U cable, plug the DB25 connector to the PC-Share connector labeled PC
IN.
2. Plug the CCP06U connectors into the PC’s keyboard, monitor, and mouse ports. Use the sup-
plied adapters for AT-style PC.
3. Plug the DC Adapter (A10D1-06MP) into an AC power outlet, and plug the other end into the PC-
Share unit DC IN.
4. Plug a keyboard, monitor, and mouse into the connectors of U
SER
P
ORT
1.
5. Power on the PC and monitor. You can now operate your computer from U
SER
P
ORT
1.
B1. Connect U
Users 22 aand/or 33 ((Steps A
A.1. tthrough A
A.3. aand A
A.5. aabove m
must b
be ccompleted ffirst).
1. Plug the DB25 connector of a user cable, CCPnnF, to the PC-Share U
SER
P
ORT
2 or U
SER
P
ORT
3.
2. Plug a keyboard, monitor, and PS/2 mouse into the connectors of the other end of the CCPnnF.
3. Power on the monitor. The user is ready to operate the PC.
B2. C
Connect U
Users 44 aand/or 55 ((Steps A
A.1. tthrough A
A.3. aand A
A.5. aabove m
must b
be ccompleted ffirst).
1. Plug the Category 5 UTP cable into the RJ45 connector of U
SER
P
ORT
4 or U
SER
P
ORT
5.
2. Plug the other end of the Category 5 UTP cable to the RJ45 port of a URKVMG.
3. Plug DC Adapter (A10DM-06MP) into a AC power outlet and plug the other end to the URKVMG.
4. Plug a keyboard, monitor, and PS/2 mouse into the URKVMG.
5. Power on the monitor. The user is ready to operate the PC.
6. The URKVMG has automatic video tuning. If video needs to be fine tuned, use a flat-head screw-
driver inserted into the opening marked Video Adjustment and adjust up or down as required .
All users have equal access to the PC. When one user is “active”– with keyboard or mouse input –
any input from other users is ignored. Video is displayed on all monitors; unless it is blanked by
PrivateView function (see below).
The first user to activate the keyboard or mouse will gain control of the PC. If the active user is inac-
tive for an interval exceeding the time out limit, any user can take control. The time out limit can be
adjusted (see below).
Hot-key functions allow any active user to set the time out limit, turn off video on the selected U
SER
P
ORTS
, and change hot-key activator. First activate hot-key mode by pressing the hot-key activator
(<ScrollLock>, by default) twice rapidly. The LED on the keyboard corresponding to the hot-key
activator will be blinking. Hot-key mode will terminate after 30 seconds if there is no input, or if the
active user presses the Esc key.
Set Time Out Limit
:
Enter Tnn<Enter> to set the time out limit. Where nn=2, 3,..., 99 seconds
(default setting is 2 seconds).
Set PrivateView:
Enter B[(1)(2)(3)(R)]<Enter> where R (Remote) represents both U
SER
P
ORTS
4
and 5 to blank video to the selected U
SER
P
ORTS
e.g., B2R<Enter> will turn off video to U
SER
P
ORT
2 and U
SER
P
ORTS
4 and 5, and leave video on at U
SER
P
ORTS
1 and 3. “B<Enter>” will
restore video to all U
SER
P
ORTS
. If video is turned off on a U
SER
P
ORT
, the user still can activate
hot-key mode if the PC is available. The video for U
SER
P
ORTS
.4 and 5 operate jointly, so U
SER
P
ORTS
.4 and 5 can only select PrivateView for U
SER
P
ORTS
1, 2, or 3.
Change Hot-key Activator:
Enter “[NumLock, CapsLock, ScrollLock]<Enter>” to change the
hot-key activator to NumLock, CapsLock, or ScrollLock (default is ScrollLock).
Operation
