31
Logout
If a front panel password has been established, the Logout function will exit the current
front panel operation and return to password protected (Figure 26). A password is needed
to gain control of the front panel functions.
1. When this function is selected, the LCD display will confirm the logout by
showing
Bye Now!
on the second line.
2. Press ESC to return to the Normal Display.
Figure 26 Log Out
Reset SMX
The Reset
SMX
function (Figure 27). lets you restart the
SMX
unit as if you had physically
turned the unit’s power off and back on again. However,
SMX
will not perform the start-up
test unless you hold down the
ENT
button during restart.
Figure 27 Reset SMX
Display Firmware Version
Display firmware version function allows you to review the firmware release level of your
SMX unit (When this function is selected, the LCD will display the unit’s firmware release
level.)
1. Press ESC to return to the Normal Display. (Figure 36)
2. When this function is selected, the LCD will display the unit’s firmware release level.
3. Press
ESC
to return to the Normal Display.
Figure 28 Display Firmware Version
Function Menu
Logout
Function Menu
Reset SMX
Function Menu
DSP Firmware Vsn
