Chapter 2: Installation and Configuration
16
Note: For KVM target servers running Windows 2000 or XP, you may
wish to create a user name that will be used only for remote connections
through the Dominion KX II. This will enable you to keep the target
server's slow mouse pointer motion/acceleration settings exclusive to the
Dominion KX II connection.
Windows XP and 2000 login pages revert to preset mouse parameters
that differ from those suggested for optimal Dominion KX II performance.
As a result, mouse synchronization may not be optimal for these
screens.
WARNING! Proceed only if you are comfortable adjusting the registry
on Windows KVM target servers. You can obtain better Dominion KX
II mouse synchronization at the login pages by using the Windows
registry editor to change the following settings:
HKey_USERS\.DEFAULT\Control Panel\Mouse: > MouseSpeed =
0;MouseThreshold 1=0;MouseThreshold 2=0.
Windows Vista® Settings
To configure KVM target servers running Microsoft Windows
Vista:
1. Configure the mouse settings:
a. Choose Start > Settings > Control Panel > Mouse.
b. Click the Pointer Options tab.
c. In the Motion group:
Set the mouse motion speed setting to exactly the middle
speed.
Disable the "Enhanced pointer precision" option.
Click
OK.
2. Disable animation and fade effects:
a. Select the System option from the Control Panel.
b. Select Performance Information then Tools > Advanced Tools >
Adjust to adjust the appearance and performance of Windows.
c. Click the Advanced tab.
d. Click the Settings button in the Performance group to open the
Performance Options dialog.
e. Under Custom options, deselect the following checkboxes:
Animation
options:
Summary of Contents for Dominion KX2-864
