Raptor MJHG014, User Manual, Page: 7 / 22

7
If you are not sure about the correct setting, start with a low temperature setting and
gradually increase the temperature until you achieve optimum results
7.1 Mounting the correct accessory (if applicable)
- Make sure that the tool is switched off and the nozzle has cooled down.
- Falling down nozzle can set an object on fire. Nozzles must be mounted firmly and
secure on the unit.
- Touching a hot nozzle can lead to serious burns .Before attaching or replacing a nozzle,
allow the unit to cool down completely or use a suitable tool.
- A hot nozzle can set a surface on fire. Place down hot nozzles only on fire-proof surfaces.
- An incorrect or defective nozzle can lead to heat accumulation and damage the unit. Use
only original nozzles according to the table that are suitable for your unit.
INSTRUCTIONS FOR USE
- Always observe the safety instructions and applicable regulations.
- Use only one hand to hold the tool, do not place your other hand over the air vents
Prior to operation:
- Mount the correct accessory for the application.
- Set the desired air temperature.
Icon Description Purpose
Glass protection nozzle Protection windows when stripping frames
Spoon reflector nozzle Soldering pipes
Cone nozzle
Welding, shrink sleeving (heat
concentrated over small area )
Fish tail surface nozzle
Drying, thawing (heat spread over wider
area )
Scraper Stripping paint and varnish