HAWK216 Instruction Manual
Document number
Revision
File name
Date
Page
2013-12-11-01
V1.1
HAWK216OEM1_IM_v1_1
19-Aug-14
11 of 19
4.2
ETX/ERROR codes
Error codes will be sent as ETX characters by the camera in response to commands that have failed.
0x50
ETX
Command acknowledge, command processed successfully.
0x51
ETX_SER_TIMEOUT
Partial command packet received, camera timed out waiting for end
of packet. Command not processed
0x52
ETX_CK_SUM_ERR
Check sum transmitted by host did not match that calculated for the
packet. Command not processed
0x53
ETX_I2C_ERR
An I2C command has been received from the Host but failed
internally in the camera.
0x54
ETX_UNKNOWN_CMD
Data was detected on serial line, command not recognized
0x55
ETX_DONE_LOW
Host Command to access the camera EPROM successfully received
by camera but not processed as EPROM is busy. i.e. FPGA trying to
boot.
