5
INSTALLATION
STANDARDS
Users
should
ensure
that
light
and
installation
materials
are
checked
for
regular
safety.
Unprofessional
incorrect
installation
can
be
dangerous. This Lighting fixture must be operated by professionals.Optimum temperatures for
operation are 15-35 Degrees Celcius. When installing, dismantling or servicing the light, do not stand directly
beneath the light. We advise that installed lights are serviced at least once a year and safety checks are carried
out every 6 months.
5.1
Installating
/R
igging
RAPTOR 2R
b e a m
moving
h e a d
lights
ca n
be
p l a c e d
on
the
stage
or
on
a
stand
in
any
direction. Quick
lock
system
enables
NOTE: Lights must have at least 50cm in between each light as
Below.
6
INSTALLATION
Your controller connects to the nearest input XLR, then from
Output of the fixture connect to the input of the next one and
so on. For long throws of DMX cable please connect a signal
ender to the last fixtures out connection.
The fixture to be installed/removed using the lighting hooks provided .
Note: must use two clamps on fixtures, a n d are 1/4 buckle fastening jig, only fully rotated 90
900mm
900mm
degrees clockwise to lock fastener.
5.2
Fixed
equipment
1.
Before installing fixtures ensure rigging equipment is not damaged and can bare at least 10 times the total weight of the lig ht, fixtures
And accessories.
2. Insert the lock hook fastener into the base mounting holes horizontally, turn 90 degrees to lock. To unlock reverse this p rocedure.
3. Alwaysuse the safety rope when installing/rigging lighting to mounts or truss points
NOTE: Add safety rope to the fixture base when installing, not the handles.
fift
3XLR
plug
1.Grounding
2.Signal-
3.
Terminal
plug
connect
with
XLR
plug
second
or
third
by
a
0.25w
120ohm
resistor,
then
connect
the
resistor
into
last
light's
DMX
output
jack
2
Please
use
the
shielded
twisted-pair
cable,
standard
microphone
c able
can
not
be
reliably
controlled
long-distance
data.
0
7
0
8
Do not use two separate out connections. If the
connecting amplifier connects in series as above.
Please use shielded DMX Cable.
