OWL 640 N/USER MANUAL/03-20/REV1.0
9.3 Contrast Modification (XCAP Std. Only)
The image contrast can be modified from the
“Contrast Modification”
section under the
“Modify”
tab in the XCAP imaging window. The location of this control feature is shown in
Figure 17.
In the contrast modification box, that can be seen from Figure 18, select
“Stretch Contrast,
Histogram Percentile Endpoints”
and click
“preview”.
The contrast modification will now be
applied over the live image feed. The contrast can be adjusted using the low and high end
percentile point controls. The default settings are usually adequate for most applications.
Figure 18: Contrast Modification.
Figure 17: Contrast Modification Location on Toolbar.
