NINOX 640 SU/USER MANUAL/01-21/REV1.0
1. INTRODUCTION
This document provides detailed instructions for the operation of the Ninox 640 SU camera.
Raptor Photonics Limited reserves the right to change this document at any time without
notice and disclaims liability for editorial, pictorial or typographical errors.
1.1 Scope
This manual covers the Ninox 640 SU digital camera and all applicable components. The
Ninox 640 SU is the lowest noise camera available. With an ultra-low typical readout noise
(rms) of 30e- and a typical dark current reading of <300e-/p/s at -80°C, the Ninox 640 SU
improves even further on its noise performance. Raptor recommends that this manual be
used to optimize camera operation. Details of the camera’s mechanical and electrical
interfaces are provided. Important precautions to be taken when using the camera are also
stated.
Detailed information is also provided on each of the cameras control parameters. Each
camera control is discussed and explained with the use of XCAP Imaging software, which is
the core plug and play software package that is offered with Raptor cameras. An image of
the camera is shown in Figure 1.
Figure 1: Complete Camera Module.
