Rapoo H8030, Quick Start Manual, Page: 6 / 6

1 2
3
Installation
A. Headset
B. Transmitter
C. USB charging cable
Configuration
Trouble Shooting
n o it u l o S m e l b o r P
No sound at all
If your problem is not solved, please contact the helpdesk at www.rapoo.com.
-Before using the headset needs to be fully charged.
-Connect the USB charging cable to the headset and a computer to charge it.
-The red LED on headset will be on when charging.
-The red LED will go off when the headset is fully charged.
-The red LED will blink when the headset is low battery.
-Connect the transmitter to your computer.
-Turn on the headset.
-The green LED will blink and then stay on when the headset is connected.
-Rotating the microphone down to the communication position,you can make calls,Rotating it up goes to the mute condition.
-Make sure you have charged the headset.
-Make the headset as your default audio device.Refer to step “5” and “10”.
-Restart the media player.
-Connect the transmitter to another USB port.
My friend on msn/skype does
not hear what I’m saying
-Check if the headset is set as default device. Refer to step “5” and “10”.
-Increase the microphone volume and increase the volume from the msn/skype software.
-Check if the headset is set as default device on msn/skype software.
Bad sound quality
-Normal wireless range is 10m,but walls or big objects may reduce the range.
-Move other working wireless devices away from the transmitter and headset.
Sound drop out when
changing the volume
-This is normal behaviour. But if it is bothering, you can use the volume control of
your media playing software.
Music selection no working
-Some media player does not support music selection.
-Move other working wireless devices away from the transmitter and headset.
-Charge the headset.
-Power off then on(Note: When power on, please do not touch the touchpad).
Touchpad doesn’t
work normally
4
5
6
7
8
9
10
11
-Go to “Playback Devices” to configure the microphone.
-Set the “Rapoo Wireless Audio” as your default device.
-Select the “Recording” tab.
-Double click on the “Microphone”.
-Set the level to 100%.
Windows XP
-Go to “Adjust Audio Properties” to configure the microphone.
-Set the “Rapoo Wireless Audio” as your default device.
-Go to the “Voice” tab.
-Click on the “Volume” of the Voice recording.
Windows 7/ Vista
-Set the level to 100%.
1