Rapiscan Mobile Trace User Manual Download Page 145

Page: 145 / 178

Calibrate the Touchscreen

(

see "Calibrate Touchscreen" on page 68)

Replace the Fuse

NOTE:

Use only 8A, 250V, Type T replacement fuses.

1. Select Menu > Logoff.

2. Press the power button on the rear of the device to turn the device

OFF.

3. Remove the power cord from the device.

To remove the power cord you must grasp it close to the red dots and pull toward you. There is a quick
disconnect that releases it from the rear panel.

4. Turn the fuse holder 1/4 turn with a flathead screwdriver to access the fuse.

Figure 7-21

Remove old fuse

5. Pull the fuse out and replace with a new one by pushing it in and turning it clockwise.

6. Replace the power cord.

Figure 7-22

Replace fuse

128

Rapiscan Systems Proprietary and Confidential

CHAPTER 7 │ User's Guide

Summary of Contents for Mobile Trace



















































































































































































Search results

Summary of Contents for Mobile Trace

Reviews:

Related manuals for Mobile Trace

Brands by name

Popular brands

Rapiscan Mobile Trace, User Manual

Search results

Summary of Contents for Mobile Trace

Reviews:

Related manuals for Mobile Trace

Brands by name

Popular brands