Rapid ABP 35 G12 Operation Manual Download Page 3

Page: 3 / 8

2. General advice

ATTENTION !

The temperature limits shown apply to the pump components and must

be respected to avoid possible damage or malfunction.

ATTENTION !

Functioning under by-pass conditions is only allowed for brief periods of

time (2-3 minutes maximum).

Given the limited weight and size of the pump (see overall dimensions), moving the pumps does not require the
use of lifting devices.
The pumps were carefully packed before shippment. Check the packing material on delivery and store in the dry
place.

3. Technical data

4. Description

The ABP 35 G12 and ABP 35 G24 are electrical Pumps suitable for urea, weak acid and weak alkaline fluid etc. or
water.

Pump: Self-priming, volumetric, diaphragm pump, equipped with by-pass valve.
Motor: Asynchronous motor, single-ohase, 2 pole, closed type (Protectionclass IP 55 in conformance with EN

60034-5-86 regulations) self ventilated

5. Assembling / Installation

5.1 Disposing of the packing material

The packing material does not require special precautions, not being in any way dangerous

or polluting.Refer to local regulations for ist disposal.

5.2   Electrical power suply
5.2.1  During installation and maintenance, make shure that the electric supply lines are not live
5.2.2 Always turn off the switch before supplying electrical power.
5.2.3  Check the connect rotation direction of the DC pump. If it is inverted,

check the polarity of the connection cable.

a) RED cable: positive pole (+)

b) BLACK cable: negative pole (-)

ATTENTION !

Power from lines with values outside the indicated limits can damage the electrical

components.

5.3 Preliminary inspection:

- Check that the machine has not suffered any damage during transport or storage.

- Clean the inlet and outlet openings, removing any dust or residual packing material.

- Make sure that the motor shaft turns freely

- Check that the electrical specifications correspond to those shown on the identification

Model