manualshive.com logo in svg

Rapid Marine Sea-Doo RTX 230, Instructions Manual

Share
Download
Rapid Marine Sea-Doo RTX 230 Instructions Manual Download Page 14

e. [email protected]   t. 00 44 (0) 1202 624 754

www.rapidmarine.co.uk

17

Each leg of the sling is colour coded Port (RED) and Starboard 
(GREEN) and marked Forward (FWD) and Aft (AFT) to ensure it 
is attached in the correct position.

AFT

FWD

PORT SIDE

AFT

FWD

STARBOARD SIDE

Attaching The Sling

www.rapidmarine.co.uk

www.rapidmarine.co.uk

e. [email protected]   t. 00 44 (0) 1202 624 754

16

Step 9

You need to check the hole has
been drilled deep enough.
Replace the bracket and push 
the 6mm bolts into the holes 
without attaching the nuts.

STEP 10

Insert the attachment handle
ensuring it is a tight fit to the
attachment bracket.

STEP 11

Rotate the attachment handle 
through 90 degrees ensuring
it moves freely.

STEP 12

Once satisfied, attach the 
backing plate, washers and 
nuts as supplied in the fitting 
kit.

w

rapidmarine.co.uk

1

Attaching The Sling

t: +44 (0) 1752 345 911

Each leg of the sling is colour coded Port (RED) and Starboard
(GREEN) and marked Forward (FWD) and Aft (AFT) to ensure it
is attached in the correct position.

STARBOARD SIDE

PORT SIDE

Summary of Contents for Sea-Doo RTX 230

















Reviews:

No comments

Brands by name

Popular brands

Load more brands