27
5.9
Front Panel Setup Items
The front panel setup items are used to configure the actions performed when the front
panel switches are pressed or held for two seconds. See section 4.8 for a list of possible
actions.
Displayed As
Item Name
Manual
Section
Item Type
Possible Actions
Default
Setting
Tap Right Action
Integer
See Section 4.8
0
Tap Up Action
Integer
See Section 4.8
0
Tap OK Action
Integer
See Section 4.8
0
Tap Left Action
Integer
See Section 4.8
0
Tap Down Action
Integer
See Section 4.8
0
Tap Cancel Action
Integer
See Section 4.8
0
Hold Right Action
Integer
See Section 4.8
0
Hold Up Action
Integer
See Section 4.8
0
Hold OK Action
Integer
See Section 4.8
0
Hold Left Action
Integer
See Section 4.8
0
Hold Down Action
Integer
See Section 4.8
0
Hold Cancel
Action
Integer
See Section 4.8
0
Table 17: Front Panel Setup Items
5.10 Serial Interface Setup Items
The serial setup items are used to configure the RS-232/485 interface. See section 4.9
for details on these settings.
Displayed As
Item Name
Manual
Section
Item Type
Possible Values
Default
Setting
Node ID
Integer
1 – 9
1
Table 18: Serial Interface Setup Items
5.11 Save to EEPROM
The Save to EEPROM menu item saves all TDD2 setup items to the nonvolatile
EEPROM. Press OK while this item is displayed to save the configuration data.
5.12 Reset to Factory Defaults
The Reset to Factory Defaults menu item returns all TDD2 setup items to the default values.
The settings are not stored in EEPROM until the Save to EEPROM menu item is activated
(see section 5.11). Press OK while this item is displayed to reset the configuration data. See
above for tables containing the default settings.
