Driver-free light effect operation manual
Press and hold FN, all keys with FN functions will light up in white.
FN+PRINT SCREEN, closes all backlight or opens all backlight and sets back to previous mode, speed
and brightness.
Key light:
FN+F12 switches light mode for key lights
FN+PAGE UP Adjusts the lighting speed of the key light. With 5 levels in total, each press will add
one level and will reset to minimum when activated again after the maximum setting. Factory
setting is set to maximum level.
FN+HOME/END Adjusts key light brightness. Press and hold to increase or decrease brightness with
21 levels in total (including off). Factory setting is set to maximum with minimum level being no
light/off
Light effect modes for key lights
No.
Name
Description
1
Changover
Press any key, then its color will change to a random color and
change to the backlight color gradually when you release (if
backlight is black, the light will turn off gradually).
2
Grid
Press any key, then the key pressed and the surrounding keys will
turn off. When you release, they will change to their backlight colors
gradually.
3
Ripple
Press any key, a random color will turn on and spread around from
the pressed key.
4
Expansion
Press any key, a random color will be on and spread in same row.
5
Tri-Expansion
Press any key, a random color will be on and spread out in the 3
surrounding rows.
6
Contraction
Press any key, a random color will be on and shrink from outer keys
to the center in the same row.
7
Tri-Contraction
Press any key, a random color will be on and shrink from outer to
center in the 3 rows around.
8
Off
Turn off key light.
