Ransomes HR380, Quick Start Manual, Page: 12 / 20

QUICK START GUIDE
en-12
ENGINE START
When the Ignition Key is turned to the start
position, this screen is shown.
If the Park Brake is applied, the Cutter
Switch (PTO) is in the OFF position, the Foot
Pedal is in the Neutral position, and the
operator is in the seat, the engine will start.
This screen shows the fuel bar graph on the
left side. The colour changes from green to
red as the fuel level decreases. The engine
temperature gauge is on the right side. The
colour changes from green to red as the
temperature increases.
ENGINE WILL NOT START
When the Ignition Key is turned to the start
position this screen is shown. If any of the
icons flash:
• The Park Brake is not applied.
• The Cutter Switch (PTO) is not in the
OFF position.
• The Foot Pedal is not in the neutral
position.
• The operator is not in the seat.
• The vehicle angle is greater than 45º.
NOTE: The engine will not start until all the
items in the list are correct.
The red LEDs either side of the display will
flash and the key icon in the centre will
appear red.
DIESEL PARTICULATE FILTER (DPF)
When the Regen Request light flashes, press
Button 4 then Button 1 on the display to start
the Parked Regen cycle. To prevent damage
to the turf during Parked Regen, park the
mower on concrete or gravel.
The engine must be warm (above 65° C /
149° F), the Traction Pedal in the NEUTRAL
position, the Cutter Switch (PTO) in the OFF
position, the Park Brake engaged, and the
throttle in the idle position for the Parked
1234 123.4 Hours
P
P
1234 123.4 Hours
02:01 3.4 Hours
®
VISUAL DISPLAY