“Get a Grip...Rad-Loc™”
1. Hinge Attach Screws
2. Hinge
3. Bridge
4. Hinge Link
5. Clamp
6. Bail Hook
7. Pivot Pin
8. Bail
9. Handle
10. Safety Catch
11. Adjuster Screws
WARNING!
RAD-LOC
SEATCLAMP
Over time the Rad-LocTM may wear and clamping power may be reduced. Adjust the two small screws at the pivot pin to restore the
clamping power.
Keep the Rad-LocTM free from grease and oil. Do not use solvents to clean the Rad-LocTM. Instead use a mild soap such as dish
detergent. Keep the frame tube and rail clean. The Rad-LocTM will still provide adequate clamping power even on a waxed frame tube or
seat rail.
Repair or replacement of any part of the Rad-LocTM system is possible because of the modular design. Refer to the parts diagram for
descriptions when ordering.
Avoid loose clothing that might hang below the seat. A loose jacket might catch on the bail handle and open the clamp while riding.
Never ride without the bail handle fully closed.
FOR MORE DETAILS ON OUR LINE OF ACCESSORIES GO TO: WWW.SHOPRANS.COM
ACCESSORIES
FOR YOUR BIKE
RANS offers a variety of custom made accessories for your RANS bike:
Summary of Contents for Bike
Page 1: ...Revised 05 05...