Instruction Manual
UBG
–
Round bale grapple
–
1 hydralic cylinder
UBG2C
- Round bale grapple
–
2 hydralic cylinder
UBGS
- Round bale grapple SMART
USBG
–
Square bale grapple
Page
24
z
35
6.1 Scrapping, the environment
In case of total wear of the machine to the level not allowing for its further use, it should be
scrapped. This also concerns routine repairs or replacement of damaged parts. With the aim of
doing it, the machine should be carefully cleaned. Drain used oil and pass it to utilization. Then
you should disassemble the machine and segregate parts according to the types of used
materials. Segregated parts should be passed to the scrap heap or for utilization according to
the rules of conduct with dangerous waste.
The machine is a fully environmental friendly product. The materials used for its production are
recyclable in 98%. Used parts of the machine should be utilized in accordance with local
environment protection law. During the whole period of machine use you shouldn't allow for oil
leak, which can cause environment pollution.
Avoid contact with oil!
Use the following personal protective equipment: protective clothes,
boots, gloves and glasses
