Instruction Manual
UBG
–
Round bale grapple
–
1 hydralic cylinder
UBG2C
- Round bale grapple
–
2 hydralic cylinder
UBGS
- Round bale grapple SMART
USBG
–
Square bale grapple
Page
18
z
35
5. Machine use
5.1. Grapple assembly
Make sure that all mounting elements of the vehicle and the grapple are matched
appropriately
to
guarantee
safe
assembly
and
operation.
In case of the lack of clarity you should definitely contact the manufacturer of the
vehicle or the grapple.
As there is a need to connect two grapple systems to the vehicle, the assembly of the grapple
should be done in the following order:
I. Assembly of mechanical system of the vehicle and the grapple.
Depending on the type of fastening system, you should provide original protections. Every time
when you assembly the system you should check the wear of connecting elements: bolts,
journals, cotter pins, pins and screw connections.
II. Assembly of the power hydraulic system
The grapple is equipped with pipes (hoses), which need to be connected to connector pipes of
the vehicle power hydraulic system. Make sure that the pipes (hoses) are run properly and check
hydraulic connectors cleanliness. Connection should be made in accordance with schematic
drawing 3
The grapple dismantling is carried out in reverse order with exercising special
caution during disassembly of mechanical system which separates the grapple
from the vehicle.