23
Scanning without markers
When scanning without markers, the fragments of the model surface may not be oriented in relation to
each other, which decreases the scanning speed and the process of gaining a 3D-model.
This scanning method may be used if the surface of the object has expressed assymetrical relief, which
will later serve as basis for fragments registering.
Sequence of actions when scanning without markers:
Prepare the surface of the object to be scanned (if needed)
Create new project without markers or open an existing one
Perform
to check calibration of the scanner
in front of the scanner at a working distance
Turn on
Stripes and lines mode,
check the sharpness of the projector and with the help of the
of cameras
Start scanning with the corresponding button
Aim the scanner at the object at a different angle to obtain the next segment
Scan the object from desired sides, controlling the quality of obtained scans in the 3D model
viewing area.
After the end of scanning
Go to SсаnMerge
for processing of obtained data
The example of obtained data when scanning without markers: