Rangevision NEO, Setup And Calibration Instructions

Page: 11 / 15

Full​ ​ calibration
The​ ​ full​ ​ calibration​ ​ dialogue​ ​ can​ ​ be​ ​ accessed​ ​ from​ ​ Calibration​ ​ → ​ ​ Calibrate​ ​ menu​ .
Calibration​ ​ procedure​ :
1. In​ ​ the​ ​ drop-down​ ​ list​ ​ choose​ ​ the​ ​ correct​ ​ calibration​ ​ plate​ ​ size,​ ​ specified​ ​ on​ ​ the
b​ ack​ ​ side​ ​ of​ ​ the​ ​ plate,​ ​ or​ ​ add​ ​ a​ ​ new​ ​ one.
It is possible that camera images in the software will be swapped or flipped​ ​ from
the start. In this case, go to ​ Hardware​ ​ settings​ ​ ->​ ​ Cameras​ menu and use​ ​ Rotate
and ​ Swap​ ​ cameras​ buttons to set the images in proper positions.
11