2. In
accordance
with
the
text
prompt
and
symbol
image
install
the calibration plate
in the
desired
position. The brightness of the images of calibration plate can be
adjusted with
exposure
slider. You
should not allow very dark images or images
with excessive brightness
areas. Press the
Capture
button. Original plate position -
the position at
the working distance from the scanner (marking on the view from
cameras matches the markers on the plate), the cross is projected on the central
marker.
3. If
the
plate
placement
is
incorrect,
an
error
message
will
appear. Correct the
placement and
repeat
the
step.
In
case
if
not
all
marks
are
found
on
the
image,
you
will
also
see
the
error
message.
It
may
mean
the
following:
●
not
all
markers
are
visible
on
one
of
the
snapshots,
●
not
all
markers
are
lit
by
the
projector,
●
calibration
plate
is
placed
at
large
angle
to
the
scanner,
●
plate
is
too
close
or
too
far
from
the
scanner
-
the
image
is
not
sharp,
●
the
plate
is
damaged
or
dirty.
Correct
all
deficiencies
and
press
Capture
.
12
