RangeVideo
Wireless Video Solutions
PLEASE READ THIS FIRST
Before building airframe!
Please read through the
complete
instructions prior to assembly and follow them
Test fit each part before applying glue
Make sure you know how and where you intend to install electronics before gluing parts together
Brushless motor rotation direction must be confirmed
The servo must be centred and the servo horn must be attached before it is glued into the wing
Ensure that the skid and motor mount is properly glued to the fuselage
The use of thick or medium CA glue with activator is recommended
Before building gimbal!
Please read through the
complete
instructions prior to assembly and follow them.
The supplied screws are specially designed for assembly and disassembly but:
- Do NOT over-tighten the screws – you will strip the thread of the plastic parts!!! -
The snap-lock between the ring and the camera holders has tight tolerance to avoid slack (SFP). Due to this it may
be difficult to disassemble, please use caution to avoid breaking the parts
The dome is of extreme high quality, the material used is clearer than glass but of course vulnerable to scratches.
The very high quality domes are sold at extremely low prices so the user can always have spares
Before flying!
Before launch make sure you have correctly set reflex and throws and that the elevons move correctly
Check that all foam hinges are undamaged
We recommend usage of the foam nose during the first flights to protect the PnT from unnecessary damage
Before flying the long wing configuration, learn and memorize how to exit the turning dive (ref: Q&A)
Do not exceed VNE of 100kph when flying the long wing configuration
30th January 2015
RVJET Manual v2.0
