OPERATOR PROTECTIVE
EQUIPMENT
Personal protective equipment helps
keep equipment use safer. However,
equipment does not take the place of
safe operating practices. Always wear
durable work clothing. Shop aprons or
shop coats may also be worn,
however loose fitting clothing should
be avoided. Tight fitting leather gloves are recommended
to protect operators. Sturdy leather work shoes with steel
toes and oil resistant soles should be used by personnel
to help prevent injury in typical shop activities.
Eye protection is essential during installation and
operation. Safety glasses with side shields, goggles, or
face shields are acceptable.
Back belts provide support during lifting activities
and are also helpful in providing operator protection.
Consideration should also be given to the use of hearing
protection if activity is performed in an enclosed area, or
if noise levels are high .
OWNER’S RESPONSIBILITY
To maintain machine and user safety, the responsibility of
the owner is to read and follow these instructions:
t
Follow all installation instructions.
t
Make sure installation conforms to all
applicable Local, State, and Federal
Codes, Rules, Regulations, such as
State and Federal OSHA Regulations.
t
Carefully check the unit for correct initial function.
t
Read and follow the safety instructions. Keep them
readily available for machine operators.
t
Make certain all operators are properly trained, know
how to safely and correctly operate the unit, and are
properly supervised.
t
Allow unit operation only with all parts in place and
operating safely.
t
Carefully inspect the unit on a regular basis and
perform all maintenance as required.
t
Service and maintain the unit only with authorized or
approved replacement parts.
t
Keep all instructions permanently with the unit and
all decal’s on the unit clean and visible.
WARRANTY POLICY
Ranger Products™ are backed by over 35 years of manufacturing experience. Every Oil Filter / Can Crusher bearing
the Ranger™ name is sold with the following warranty.
• Each Ranger Product™ is warranted to be free from defects in workmanship and material for a period of one
year from the date of shipment provided that a written claim for such defect is made within that time.
• This warranty does not cover damage or defects caused by carelessness of the operator, misuse, abuse or
abnormal use which in any way impairs the proper functioning of the equipment or by the use or addition of
parts not manufactured by Ranger Products™ or its suppliers.
THIS WARRANTY IS EXPRESSLY MADE IN LIEU OF ANY AND ALL OTHER WARRANTIES EXPRESSED OR
IMPLIED INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS OR A PARTICULAR PURPOSE.
If your Ranger Products™ machine is not functioning properly, call your Ranger Products™ dealer immediately.
On some occasions, an independent contractor may be hired to do the repairs. Within the warranty period, a customer
should not hire his own contractor unless it is authorized in writing by Ranger Products™.
If it is necessary to return equipment for repairs, your dealer will so advise you. When returning equipment for repairs,
see that machines are properly crated and protected, and prepay transportation.
Defective parts replaced at no charge must be returned to your dealer or Ranger Products™ within 60 days of the date
that the replacement parts are shipped; otherwise, you must pay for the replacement parts at the current selling price.
RP-50FC OIL FILTER / CAN CRUSHER
2
