Ranger RP-20HD Installation And Operation Manual Download Page 3

3

THIS OPERATING MANUAL CONTAINS 

IMPORTANT DETAILS CONCERNING THE 

SAFE OPERATION OF THIS EQUIPMENT. 

THE USER MUST READ AND UNDERSTAND 
THESE DETAILS BEFORE ANY USE OF THE 

EQUIPMENT.  THIS MANUAL MUST BE 

RETAINED FOR FUTURE REFERENCE. 

OWNER/OPERATOR 

RESPONSIBILITY:

 

The owner and/or operator shall study the product 

instructions and retain them for future reference. 

The owner and/or operator shall have an understanding 

of the product operating instructions and warnings before 

operating the equipment. 

Warning information shall be emphasized and 

understood. If the operator is not 

fl

 uent in English, the 

product instructions and warnings shall be read to and 

discussed with the operator in the operator’s native 

language by the purchaser/ owner or his designee, 

making sure that the operator comprehends its contents. 

INSPECTION

Visual inspection should be made before each use of the 
equipment. This inspection should check for abnormal 
conditions such as cracked welds, leaks, and damaged, 
loose or missing parts. 

Any product  that appears to be damaged in any way, 
is found to be worn or operated abnormally, must be 
removed from service immediately.

Any product that operates abnormally shall be removed 
from service until repaired by a quali

fi

 ed repair service 

center. 

If the product is accidentally subjected to an abnormal 
load or shock, it must be taken out of service immediately 
and be inspected by a quali

fi

 ed repair or service center. 

It is recommended that an annual inspection is performed 
on the equipment and that any damaged or worn parts, 
decals or warning labels be replaced with manufacturer’s 
speci

fi

 ed parts. 

ALTERATIONS 

Because of potential hazards associated with this type of 

equipment, no alterations shall be made to the product. 

WARNING!

T

HIS IS A PRESSING DEVICE ONLY. 

DO NOT EXCEED RATED CAPACITY. 

OVERLOADING CAN CAUSE DAMAGE TO 

OR FAILURE OF THE SHOP PRESS. 

KEEP HANDS AND BODY CLEAR

 OF ALL PINCH POINTS.

NO ALTERATIONS TO THE PRESS SHALL BE MADE. 

READ, STUDY AND UNDERSTAND THE OPERATING 

MANUAL PACKED WITH THIS LIFT BEFORE 

OPERATING. 

ALWAYS WEAR APPROVED EYE 

PROTECTION DURING OPERATION.

FAILURE TO HEED THESE WARNINGS MAY RESULT 

IN LOSS OF LOAD, DAMAGE TO THE PRESS , AND/

OR FAILURE RESULTING IN PROPERTY DAMAGE, 

PERSONAL OR FATAL INJURY. 

Summary of Contents for RP-20HD







Reviews: