Manual.
Ranger Floor Jack,
Installation and Operation Manual
, Manual P/N 5900393, Manual Revision B,
Released July 2017.
Copyright.
Copyright © 2017 by BendPak Inc. All rights reserved. No part of this manual can be reproduced,
adapted, translated, or transmitted by any means, electronic or mechanical, for any purpose or in any form,
without prior written permission of BendPak Inc.
Trademarks.
BendPak, the BendPak logo, Ranger, and the Ranger logo are registered trademarks of BendPak
Inc. All other company, product, and service names are used for identification only. All trademarks and registered
trademarks mentioned in this manual are the property of their respective owners.
Limitations.
Every effort has been made to ensure complete and accurate instructions are included in this
manual. However, product updates, revisions, and/or changes may have occurred since this manual was
published. BendPak Ranger reserves the right to change any information in this manual without incurring any
obligation for equipment previously or subsequently sold. BendPak Ranger is not responsible for typographical
errors in this manual.
Warranty.
The BendPak Ranger warranty is more than a commitment to you: it is also a commitment to the
value of your new product. For full warranty details and to register your new BendPak Ranger product, contact
your nearest BendPak Ranger dealer or visit
www.bendpak.com/support/warranty
.
Safety.
Your new product was designed and manufactured with safety in mind. Your safety also depends on
proper training and thoughtful operation. Do not set up, operate, maintain, or repair the unit without reading and
understanding this manual and the labels on the unit.
Owner Responsibility.
In order to maintain your product properly and to ensure operator safety, it is the
responsibility of the product owner to read and follow these instructions:
• Follow all setup, operation, and maintenance instructions.
• Make sure product setup conforms to all applicable local, state, and federal codes, rules, and regulations,
such as state and federal OSHA regulations and electrical codes.
• Read and follow all safety instructions. Keep them readily available for operators.
• Make sure all operators are properly trained, know how to safely operate the unit, and are properly supervised.
• Do not operate the product until you are certain that all parts are in place and operating correctly.
• Carefully inspect the product on a regular basis and perform all maintenance as required.
• Service and maintain the unit only with approved replacement parts.
• Keep the manual with the product and make sure all labels are clean and visible.
Unit Information.
Enter the Model Number, Serial
Number, and the Date of Manufacture from the label
on your unit. This information is required for part or
warranty issues.
Model:
Serial:
Date of Manufacture:
