12V HELM CONTROL OPERATION
STE
The high bilge alarm should be set to the “armed” position for it to automatically operate. This is
wired directly to battery power at the house cutoff switch. The high bilge alarm will still be active
when the main battery cutoff switches are set to the off position.
The Heater Control will operate the fan speed of the Heater Craft Heater. The Heater
Craft Cabin Heater will only warm as the engine reaches normal operating temperature.
Must turn on DC
breaker before
heater switch
will operate
TEST is up
OFF is in the middle
ARMED is down
Push
button
breakers
“Up” all Navigational lights on.
“Center” is all off.
“Down” is anchor light only.
WIPERS
WIPERS
WIPERS
WIPERS
FANS
THRUSTER
REMOTE
NAV
LIGHTS
NAV
LIGHTS
HORN
BILGE ALERT
HIGH WATER ALARM
TEST
OFF
ARMED
WINDLASS
16
