Ranger Products RFJ-10TL, Installation And Operation Manual

Page: 3 / 8

3
THIS OPERATING MANUAL CONTAINS
IMPORTANT DETAILS CONCERNING THE
SAFE OPERATION OF THIS TOOL THE
USER MUST READ AND UNDERSTAND
THESE DETAILS BEFORE ANY USE OF THE
TOOL. THIS MANUAL MUST BE RETAINED
FOR FUTURE REFERENCE.
OWNER/OPERATOR
RESPONSIBILITY:
The owner and/or operator shall study the product
instructions and retain them for future reference.
The owner and/or operator shall have an understanding
of the product operating instructions and warnings before
operating the jack.
Warning information shall be emphasized and
understood. If the operator is not fl uent in English, the
product instructions and warnings shall be read to and
discussed with the operator in the operator’s native
language by the purchaser/ owner or his designee,
making sure that the operator comprehends its contents.
INSPECTION
Visual inspection should be made before each use of the
jack. This inspection should check for abnormal
conditions such as cracked welds, leaks, and damaged,
loose or missing parts.
Any jack that appears to be damaged in any way, is found
to be worn or operated abnormally, must be removed
from service immediately.
Any jack that operates abnormally shall be removed from
service until repaired by a quali
fi ed repair service center.
If the jack is accidentally subjected to an abnormal load
or shock, it must be taken out of service immediately and
be inspected by a quali
fi ed repair or service center.
It is recommended that an annual inspection is performed
on the jack and that any damaged or worn parts, decals
or warning labels be replaced with manufacturer’s
speci
fi ed parts.
ALTERATIONS
Because of potential hazards associated with this type of
equipment, no alterations shall be made to the product.
FOR YOUR SAFETY AND TO PREVENT INJURY:
Use Service Jack for lifting purposes ONLY.
Always support vehicle with jack stands.
WARNING!
T HIS IS A LIFTING DEVICE ONLY. DO NOT MOVE OR
DOLLY THE VEHICLE WHILE ON THE JACK.
IMMEDIATELY AFTER LIFTING, SUPPORT THE
VEHICLE WITH APPROPRIATE MEANS.
DO NOT EXCEED RATED CAPACITY.
OVERLOADING CAN CAUSE DAMAGE TO
OR FAILURE OF THE JACK.
LIFT ONLY ON AREAS OF THE VEHICLE AS
SPECIFIED BY THE VEHICLE MANUFACTURER.
KEEP HANDS AND BODY CLEAR OF ALL PINCH
POINTS.
CENTER LOAD ON SADDLE PRIOR TO LIFTING.
OFF-CENTER LOADS MAY CAUSE DAMAGE TO
JACK, LOSS OF LOAD, PROPERTY DAMAGE,
PERSONAL OR FATAL INJURY.
THIS JACK IS DESIGNED FOR USE ONLY ON HARD
LEVEL SURFACES CAPABLE OF SUSTAINING THE
LOAD. USE ON OTHER THAN HARD LEVEL
SURFACES CAN RESULT IN JACK INSTABILITY AND
POSSIBLE LOSS OF LOAD.
NO ALTERATIONS TO THE JACK SHALL BE MADE.
READ, STUDY AND UNDERSTAND THE OPERATING
MANUAL PACKED WITH THIS JACK BEFORE
OPERATING.
FAILURE TO HEED THESE WARNINGS MAY RESULT
IN LOSS OF LOAD, DAMAGE TO JACK, AND/OR
FAILURE RESULTING IN PROPERTY DAMAGE,
PERSONAL OR FATAL INJURY.