18
3. Operate the
UP
control until each jack platform makes
contact with vehicle undercarriage. Check contact points.
If required, slightly position Rubber Lift Blocks as needed.
4. When ready, raise vehicle keeping the UP button
FRQWLQXRXVO\GHSUHVVHGXQWLOWLUHVFOHDUWKHÀRRUDQGWKH
MDFNIUDPHVDUHDWOHDVW´RIIWKHJURXQGRUWKH¿UVW
safety lock position has been reached.
5. Continue to raise to desired height only if vehicle is
VHFXUHRQOLIW.HHSKDLUORRVHFORWKLQJ¿QJHUVDQGDOO
parts of body away from moving parts. Keep feet clear of
jack when lowering. Avoid pinch points.
6. Operate the UP control until each jack platform
reaches either the low locking position or high locking
position.
7. Raise vehicle to desired locking position, then ensure
both safety lock bars (#1) are fully engaged in their
respective receiver (#2) before nearing elevated vehicle.
STAY ALERT
. Use common sense and watch what you
are doing. Remember,
SAFETY FIRST
.
ALWAYS MAKE SURE THE SAFETIES ARE
ENGAGED BEFORE ATTEMPTING TO WORK ON OR
NEAR A VEHICLE.
DO NOT GO NEAR OR UNDER A RAISED VEHICLE
IF ALL FOUR RUBBER LIFTING BLOCKS ARE NOT IN
SECURE CONTACT WITH VEHICLE.
IMMEDIATELY CLEAR AREA IF VEHICLE IS IN
DANGER OF FALLING.
TO LOWER JACK FRAMES
(QVXUH WKDW ORDG LV ¿UPO\ SRVLWLRQHG DQG VHFXUHG RQ
jack frames.
2. Operate the
UP
control until safety lock bars are clear.
3. Raise and stow the safety lock bars.
4. Stand clear of vehicle and jack frames.
5. Operate the
DOWN
control until both the jack frames
DUHORZHUHGFRPSOHWHO\WRWKHÀRRU
6. Using the utility handles, remove the jack frames from
underneath the vehicle.
7.
DO NOT
drive or ride vehicles over jack frames at any
time.
IMPORTANT NOTE:
Before removing vehicle, both jack frames must be fully
lowered and working area cleared of any obstruction
before vehicle is brought into position.
DO NOT
drive on
or ride vehicles over jack frames at any time.
1
2
