For technical support, contact us at 1-800-565-5321
C5-PA18-8 Installation Guide
| REV. D | Page
13
2.4.2
• Lift the parskeeper cabinet inside the van, then put it in place.
• Mark the 2 holes of each floor bracket, then place the partskeeper cabinet on the side.
• Drill the marks on the floor using 1" hole saw, then drill holes into the van floor for plus nut.
• Attach plus nut in the van floor, then lift the partskeeper cabinet back in place, and attach
the floor braket to the plus nut.
with
ranger
floor
#94-104 Hex Nut
#98-116 Lock Washer
#98-122 Flat Washer
#90-490 Carriage Bolt 5/16" × 1"
HARDWARE USED
2×
floor
fastener
kit
#92-102 Screw 1"
HARDWARE USED
2×
floor
fastener
kit
TOOLS
q
Cordless Impact
q
3/8" Driver Bit
q
1/2" Socket
7/16 drill hole
TOOLS
q
Marker
q
7/16" Drill Bit
q
1/2" Socket
q
Drill Collar
E-FLOOR
STANDARD FLOOR
HARDWARE USED
4×
hand
-
tighten
the
bolts
#90-204 Hex Bolt 5/16" × 3/4"
#98-116 Flat Washer
#98-116 Lock Washer
#99-114 Zinc Alloy Tapping Inserts
for Softwood
