Ranger design C5-BA11-5 Installation Manual Download Page 11

Page: 11 / 16

For technical support, contact us at 1-800-565-5321

C5-BA11-5 Installation Guide

| REV. A1 | Page

FORWARD

REVERSE

STEP:

Put the plusnut on the plusnut gun, then attach the plus nut in the hole by turning the gun forward until

the plus nut locks, then remove the gun by turning in reverse.

•

using

plusnut

gun

•

using

the

6491

plusnut

tool

2.3.2

How to attach plus nut.

6491

HARDWARE USED

Flat washer 5/16"

Flat washer 5/16" BS × 7/8" OD

TOOLS

Cordless Impact

1/2" Socket

9/16" Wrench

STEP 1:

Assemble the 6491 plusnut tool with the hardware needed, plus

nut and the 9/16" wrench as shown.

FORWARD

REVERSE

STEP 2:

Attach the plus nut in the hole by turning

the bolt forward using an impact with a

1/2" socket until the plusnut locks, then

remove the bolt by turning the impact in

reverse.

NOTE:

The hardware used for the 6490 plusnut tool is not included in the fastener bag.

The 6490 plusnut tool can be ordered separately upon demand at no charge.

Summary of Contents for C5-BA11-5

















Search results

Summary of Contents for C5-BA11-5

Reviews:

Related manuals for C5-BA11-5

Brands by name

Popular brands

Ranger design C5-BA11-5, Installation Manual

Search results

Summary of Contents for C5-BA11-5

Reviews:

Related manuals for C5-BA11-5

Brands by name

Popular brands