INSTALLATION
Check the appliance is electrically safe and gas sound when you have finished.
22
Checking the Parts:
Location of Cooker
The cooker may be installed in a kitchen/kitchen diner but
NOT in a room containing a bath or shower.
This appliance is designed for domestic cooking only. Use
for any other purpose could invalidate any warranty or
liability claim.
Note:
An appliance for use on LPG must not be installed
in a room or internal space below ground level, e.g. in a
basement.
You will need the following equipment to complete
the cooker installation satisfactorily:
•
Stability bracket: If the cooker is to be supplied with
gas through a flexible hose, a stability bracket or chain
MUST be fitted.
These are not supplied with the cooker
but are
available at most builders’ merchants.
•
Gas pressure tester/manometer.
•
Flexible gas hose: Must be in accordance with the
relevant standards.
•
Multimeter: For electrical checks.
You will also need the following tools:
1.
Electric drill
2.
Masonry drill bit (only required if fitting the cooker on a
stone or concrete floor)
3.
Wall plugs (only required if fitting the cooker on a stone
or concrete floor)
4.
Steel tape measure
5.
Cross head screwdriver
6.
Flat head screwdriver
7.
Spirit level
8.
Pencil
9.
Adjustable spanner
10.
Screws for fitting stability bracket
11.
13 mm spanner (or socket wrench)
3 pan supports
Plinth
ArtNo.000-0001 90 Pan supports
Griddle
Grill pan & trivet
ArtNo.330-0001 - Grill pan
1 flat shelf
1 drop shelf
Handyrack
Roasting tin
ArtNo.324-0003 Handyrack
ArtNo.324-0004 Roasting tin
Tall oven shelves and shelf
supports
ArtNo.000-0010 Tall oven shelves
