7
Fig. 3.4
Fig. 3.5
Fig. 3.6
Accessories
The Fresh Dial (
Fig. 3.4
)
If the crisper is full, the fresh dial located in front of the crisper
should be opened.
This allows the air in the crisper and the humidity rate to be
controlled, to increase the life of food within.
The dial, located behind the shelf, must be opened if any
condensation is seen on the glass shelf.
Opti-lift™
Six different height adjustments can be made to provide
storage areas that you need by adjustable door shelf.
To change the position of adjustable door shelf.
Remove all foods, bottles and liquids from Opti-lift™ tray
before adjusting height.
Hold the bottom of the shelf and pull the buttons on the side
of the door shelf direction of arrow (Fig. 3.5). Position door
shelf to the height you need by moving up and down. After
you set the position, release the buttons on the side of the
door shelf (Fig. 3.6) Before releasing the door shelf, move up
down and make sure the door shelf is fixed.
Note: Before moving door shelf is loaded, you must hold the
shelf by supporting the bottom. Otherwise, door shelf could
fall off the rails due to the weight. So damage may occur on
the door shelf or rails.
Summary of Contents for RTFR18/INT
